Filters

List of latest power-bore Tenders in Indian Tenders. Click on any power-bore Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for power-bore Tenders.

Name: Municipality
Start: 2025-04-24
End: 2025-04-28
Location: Sangareddy

All-Tenders (235)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Corporations And Associations And Others

TRN :34421643 | 28 Apr, 2025

Tender Value : 6.66 Lacs

Sangareddy - Telangana

Tender for repairs and maintenance of power bore wells and pump sets and procurement of motor starters and other accessories in sadasivpet municipality, under 15th fc grants, 2024-25.

Central Government/Public Sector

TRN :34404893 | 12 May, 2025

Tender Value : 0

Jamshedpur - Jharkhand

Tender for gem bids for clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. "supplying chemical emulsion in sealed containers including delivery as specified. chlorpyriphos or lindane emulsifiable concentrate of 20 percent" "diluting and injecting chemical emulsion for post constructional anti termite treatment excluding the cost of chemical emulsion along external wall where the apron is not provided using chemical emulsion at the rate 7.5 litres or sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall and rodding etc. complete isto with chlorpyriphos or lindane e.c. 20 percent with 1 percent concentration" "earth work in excavation by mechanical means hydraulic excavator or manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m all kinds of soil." filling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete. "providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size " "providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement all work up to plinth level isto 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size " "reinforced cement concrete work in walls any thickness including attached pilasters buttresses plinth roof and string courses fillets columns pillars piers abutments posts and struts etc. above plinth level up to floor five level excluding cost of centering shuttering finishing and reinforcement 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size " brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1 isto 6 1 cement 6 coarse sand brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1 isto 6 1 cement 6 coarse sand "half brick masonry with common burnt clay f .p .s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level. cement mortar 1 isto 4 1 cement 4 coarse sand " "centering and shuttering including strutting propping etc. and removal of form for foundations footings bases of columns etc. for mass concrete" "centering and shuttering including strutting propping etc. and removal of form for suspended floors roofs landings lintals beams balconies and access platform" "steel reinforcement for r.c.c. work including straightening cutting bending placing in position and binding all complete upto plinth level thermo mechanically treated bars of grade fe 500d or more make sail or tata or jindal " "15 mm cement plaster on the rough side of single or half brick wall of mix isto 1 isto 6 1 cement isto 6 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " "12 mm cement plaster of mix 1 isto 6 1 cement isto 6 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " "6 mm cement plaster of mix 1 isto 3 1 cement 3 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " neat cement punning. "finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade new work two or more coats applied at the rate 1.43 ltr or 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg or 10 sqm make dulux or burger or asian paints or as per direction of eic" white washing with lime to give an even shade new work three or more coats mix with fevicol ddl and robin blue or as per direction of eic "painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. preferable make dulux or burger or asian paints or as per direction of eic make dulux or burger or asian paints or as per direction of eic" making plinth protection 50mm thick of cement concrete 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size over 75mm thick bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling and dressing and finishing the top smooth "providing and fixing angle iron frames for doors windows and ventilators of mild steel angle sections of size 35x35x5 mm joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing t iron frame or to the wall with dash fastener including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer all complete as per the direction of engineer in charge. make sail or tata or jindal " "providing and fixing isi marked flush door shutters conforming to is isto 2202 part i decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including isi marked stainless steel butt hinges with necessary screws" "structural steel work in single section fixed with or without connecting plate including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete. make sail or tata or jindal " 25 mm thick pvc flush door shutters made out of a one piece multi chamber extruded pvc section of the size of 762 mm into 25 mm or less as per requirement with an average wall thickness of 1 mm plus or minus 0.3 mm . pvc foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. m.s. tube having dimensions 19 mm into 19 mm and 1.0 mm plus or minus 0.1 mm is inserted along the hinge side of the door. core of the door shutter should be filled with high density polyurethane foam. the top and bottom edges of the shutter are covered with an end cap of the size 25 mm into 11 mm. door shutter shall be reinforced with special polymeric reinforcements as per manufacturer specification and direction of engineer in charge to take up necessary hardware and fixtures. stickers indicating the locations of hardware will be pasted at appropriate places "providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and scrows etc. complete .as per the direction of directions of engineer in charge.300x16 mm " "providing and fixing ist quality ceramic glazed wall tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make somany or kajaria or nitco in all colours shades except burgundy bottle green black of any size as approved by engineer in charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 isto 3 1 cement 3 coarse sand and jointing with grey cement slurry at the rate 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. make isto somany or kajaria or nitco or asian or as per direction of eic" "providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08percent and conforming to is 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 isto 4 1 cement 4 coarse sand jointing with grey cement slurry at the rate 3.3 kg or sqm including grouting the joints with white cement and matching pigments etc. complete. size of tile 600x600 mm make somany or kajaria or nitco or asian or as per direction of eic" "providing and fixing water closet squatting pan indian type w.c.pan with 100 mm sand cast iron p or s trap 10 litre low level white p.v.c. flushing cistern including flush pipe with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests preferable make hindware or parrywair or hindustan or cera or direction of eic" "providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required one urinal basin with 5 litre white p.v.c. automatic flushing cistern preferable make hindware or parrywair or hindustan or cera or direction of eic" "providing and fixing wash basin with c.i. brackets 15 mm c.p. brass pillar taps 32 mm c.p. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require isto white vitreous china wash basin size 630x450 mm with a single 15 mm c.p. brass pillar tap" "providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. semi rigid pipe 32 mm dia" providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with c.p . brass screws and washers complete. "providing and fixing brass bib cock of approved quality 15 mm nominal bore" "providing and fixing brass stop cock of approved quality 15 mm nominal bore" providing and fixing circular or hexagonal cast iron or m.s. sheet box for ceiling fan clamp of internal dia 140 mm 73 mm height top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron or m.s. sheet box by means of 3.3 mm dia round headed screws one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. providing and fixing isi marked oxidised m. s handles conforming to is 4992 with necessary screws etc. complete 125 mm providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete. providing and fixing is 12817 marked stainless steel butt hinges heavy weight with stainless steel screws etc. complete 100x60x2.50 mm "providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work a. 15 mm dia nominal bore preferable make tata or jindal or as per direction of eic" "providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work b. 20 mm dia nominal bore preferable make tata or jindal or as per direction of eic" providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work d. 50 mm dia nominal bore preferable make tata or jindal or as per direction of eic "providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is 13592 type a including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion single socketed pipes. 110 mm diameter" "providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end isto 20 mm nominal bore" "providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end isto 50 mm nominal bore" providing and placing on terrace at all floor levels polyethylene water storage tank is isto 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank. providing and fixing 100 mm sand cast iron grating for gully trap constructing brick masonry chamber for underground c.i. inspection chamber and bends with bricks in cement mortar 1 isto 4 1 cement 4 coarse sand c.i. cover with frame light duty 455x610 mm internal dimensions total weight of cover with frame to be not less than 38 kg weight of cover 23 kg and weight of frame 15 kg r.c.c. top slab with 1 isto 1.5 isto 3 mix 1 cement 1.5 fine sand isto 3 graded stone aggregate 20 mm nominal size foundation concrete 1 isto 5 isto 10 1 cement 5 fine sand 10 graded stone aggregate 40 mm nominal size inside plastering 12 mm thick with cement mortar 1 isto 3 1 cement isto 3 coarse sand finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets isto with common burnt clay f.p.s. non modular bricks of class designation 7.5 "constructing masonry chamber 30x30x50 cm inside in brick work in cement mortar 1 isto 4 1 cement isto 4 coarse sand for stop cock with c. i. surface box 100x100 x75 mm inside with hinged cover fixed in cement concrete slab 1 isto 2 isto 4 mix 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20 mm nominal size i or c necessary excavation foundation concrete 1 isto 5 isto 10 1 cement isto 5 fine sand isto 10 graded stone aggregate 40mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement isto 3 coarse sand 12mm thick finished with a floating coat of neat cement complete as per standard design isto with common burnt clay f.p.s. non modular bricks of class designation 7.5" providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level isto 1 isto 1.5 isto 3 1 cement isto 1 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter 1.8 m long complete as per standard design. with common burnt clay f.p.s. non modular bricks of class designation 7.5 "cement concrete flooring 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate" "providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm plus 0.05 percent total coated thickness zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns using self drilling or self tapping screws complete ridges plain 500 to 600mm " "providing and fixing precoated galvanised iron profile sheets size shape and pitch of corrugation as approved by engineer in charge 0.50 mm plus 0.05 percent total coated thickness with zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin charge. the sheet shall be fixed using self drilling or self tapping screws of size 5.5 x 55 mm with epdm seal complete upto any pitch in horizontal or vertical or curved surfaces excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required." providing and fixing of glass panes with putty and glazing clips in steel doors and windows all complete with 4mm thick glass panes etc. complete. supply of led tube light fittings .make c.g. or philips fixing of led tube light fittings including supply of all hardwares as required. led fitting will be supplied by contractor. make c.g. or philips supply of 48 sweep ceiling fan complete with down rod.clamp canopy etc. fixing of 48 sweep ceiling fan complete with down rod.clamp canopy etc.fan hardwares required for fixing for i.e. nut bolts clamp screws etc wiil be supplied by contractor. supply and fixing of stepped type electronic fan regulator on existing switch board. wiring for light point fan point exhaust fan point with 1.5 sqmm frls pvc insulated copper conductor single core cable in consield with modular switch modular plate suitable gi box and earthing the point with 1.5 sqmm frls pvc insulated copper conductor cable as required. supply of frls pvc insulated copper conducter single core cable of size 6 sqmm. make havells or kei or polycab or national wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in consield or recessed medium class pvc conduit in concield as required 2 x 6 sqmm plus 1 x 6 sqmm earth wire. all the three colours should be red blue and green supply and fixing of utility db p or s 20a dp metal plug and socket distribution board grey make anchor or havells supply and installation of three phase industrial box with 32 amp 4 pole mcb and 5 pin top plug. make neptune or reputed make supply of frls pvc insulated copper conducter single core cable of size 10 sqmm. make havells or kei or polycab or national wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in surface or recessed medium class pvc conduit in concield as required 4 x 10 sqmm + 1 x 10 sqmm earth wire.all the five colours should be red blue yellow black and green preparation of earth pit with supply of all materials including 3m long 3.64mm thick perforted gi tube with salt and charcol in alternate layer and brick chamber at the top with chequered plate 6mm thick as per is 3043 with latest. supply and laying 25mm x 5 mm gi strip at 0.5 meter below ground or wall including connection with electrode with db. supply of all hardware are in scope of contractor supply ans fixing of surface mounting vertical type 415 volts tpn mcb distribution board of sheet steel dust proctected duly power coated painted inclusive 200 amp tinned copper bus bar common neutral link earth bar din bar for mounting mcb with provision of 100 amp tpn mccb as incomer interconnection between incomer mccb and busbar. supply and fixing of 5 to 32 amp rating 240 or 415 volt mcb suitable as per load. supply and fixing of four pole 100 amp rating 415 volt 16 ka mccb . laying of 1.1kv grade pvc al.cable of size 2 or 3 or 3.5 or 4c 2.5 or 6 or 10 or 16 or 25 or 35 sq.mm in underground trench of 760mm deepx760mm wide in single tier formation including trench excavation and back filling with bricks 15brick or m and sand protection route marker. road or concreete or bolder cutting and finishing the road to its original shape are in the scope of the contractor. supply and fixing of street light on wall including supply of all necessaryu hardware for fixing of fitting on wall. supply and fixing of bulk head fitting on wall including supply of all necessaryu hardware for fixing of fitting on wall. supply installation and commissioning of exhaust fan of size 300 mm dia. this includes cutting of wall and finishing and supply of hardware like nut bolts etc. make crompton

State Government

TRN :34406494 | 30 Apr, 2025

Tender Value : 3.50 Lacs

Kovilpatti - Tamil Nadu

Tender for providing bore well, mini power pump room with water supply arrangements at ward no.13, ettayapuram road in vilathikulam

State Government

TRN :34406532 | 25 Apr, 2025

Tender Value : 0

Cuddalore - Tamil Nadu

Tender for providing of mini power pump existing bore well at ward no 02 ward no 03 ward no 04 and ward no 15

State Government

TRN :34400850 | 28 Apr, 2025

Tender Value : 0

Tuticorin - Tamil Nadu

Tender for providing deep bore well, mini power pump room arrangemants and water supply arrangements at sathankulam colony3, viriportar street, and nazareth road near petrol bulk in sathankulam

corporations/Associations/Others

TRN :34403475 | 29 Apr, 2025

Tender Value : 0

Bacheli - Chhattisgarh

Tender for gem bids for material code 1600014673 sli a2b switch,p.nz9352000015 , material code 1600551014 pto solenoid, p.n fl403100 , material code 1600221523 coil slew brake, p.n 9926109974 , material code 1600551015 clutch unit, p.n 8333900 , material code 1600013950 realy 24v 20amps,p.n7750000710 , material code 1600028281 solenoid coil, p.n z9926001058 , material code 1600551016 90 deg. swivel joint, p.n w7364000100 , material code 1600551017 expansion bellow, p.n x4131800059 , material code 1600551118 return line filter, p.n x7437000059 , material code 1600551119 hyd hose, p.n 7555215600 , material code 1600525987 automotive spinfilt ashok p.n f7a05000 , material code 1600551120 fuel filter, p.n x8820800 , material code 1600551121 water seperator, p.n f7b02900 , material code 1600035617 primary filterhyd,p.n f7b01100 , material code 1600035798 secondary filterair ,p.n f7b01200 , material code 1600551122 seal kit for hoist unit, p.n z9974001178 , material code 1600551123 s kit for o.r extn cyl, p.n z9372000707 , material code 1600551124 elec accltor pedal switch, p.n z78720002 , material code 1600551125 throttle pedal, p.n z4175200035 , material code 1600551126 seal kit for lift cyl, p.n z9372005881 , material code 1600014674 seal kit for o.r jack,p.nz9372000624 , material code 1600013988 seal kit,p.n8341514 , material code 1600221519 3.4 inch ors swivel joint, p.n. 7364001615 , material code 1600551127 hose outrigger, p.n 13459 , material code 1600551128 hose 3.8 inch bore 2390 lg, p.n x7543000445 , material code 1600551129 hoseoutrigger, p.n 464553 , material code 1600031720 hose for out rigger ,p.n.504604 , material code 1600013987 hose,p.n8304372 , material code 1600014669 c.v.m.c assy,p.nz2162400025 , material code 1600014670 slave cyl assy,p.nz7372000106 , material code 1600551130 hose assy, p.n 7555503061 , material code 1600551131 hyd hose, p.n 7555502960 , material code 1600551132 tele hyd hose , p.n 7555304800 , material code 1600551133 tele hyd hose, p.n 7555504161 , material code 1600551134 lift hyd hose, p.n 7555102903 , material code 1600022170 sheave assy,p.n 6718001122 , material code 1600551135 power steering pump, p.n f8394600

Central Government/Public Sector

TRN :34374920 | 30 Apr, 2025

Tender Value : 0

Darjeeling - West Bengal

Tender for gem bids for prefabricated structure of size 7200 x 5000 x 2400 mm , prepainted galvalume sheet 3200x1050x0 point 63mm , pre painted pgi roof ridge 1800x 600mm long , non skid ceramic tiles of size 600x600x7 to 8mm , glazed ceramic wall tiles of size 200x300x7mm , white cement in kg pkt , lime unslaked , solid pvc insulation panels having wall thickness of 1mm pvc sheet across the intermediate channel , hangers 6mm dia g i up to 1200mm length , cable pvc insulated aluminium conductor served with inner sheathing of pvc tape service cable , pvc sheathead copper frls cable 1 point 5 sqmm single core with multistrand 1100 volts grade , pvc sheathead copper frls cable 2 point 5 sqmm single core with multistrand 1100 volts grade , pvc insulated and sheathead multistranded copper cable 1 point 0 sqmm single core with multistrand 1100 volts grade , pvc insulated and pvc sheathed multistranded copper conductor flexible industrial cable1100 volts , enamel lamp shed 250mm dia conical metal sheds shall be well finished in vitreous enamel blue or green outside and white , decorative type ultra slim linear led lighting fixture with efficient led tube light fitting 18 watt , led security light energy saving and environmental friendly long life versatile pressure die cast aluminium ip 66 with high power led , mirror led light 9 watt up and down type , led bulb of 10 watt 220 v 50 hz , switch piano moduler type 10 amp one way , switch piano moduler type 20 amp one way , socket multipurpose 3 pin 10 and 3 pin 20 amp modular type of 2 module , socket 10 a modular type , surface plastic box suitable for moduler switches and socket of 4 module , surface plastic box suitable for moduler switches and socket of 3 module , solid plate with base frame suitable for surface plastic box of 4 module , solid plate with base frame suitable for surface plastic box of 3 module , blank plate of single module , steel screw full threaded screw 1 inch , conduit pipe 20mm dia 10 feet long , pvc tee 20mm , pvc elbow 20mm , pvc circular jn box 2 to 4 way , pvc shaddle clip with screw , ceiling rose pvc , pvc square block , tape insulation 10 mtr , mcb db spn 8 way double door 240 volts with bus bar , mcb 6 amps sp , mcb 20 amps sp , mcb spn 40 amps 240 volts , exhaust fan 300mm sweep with louver shutter , pendent holder made of bakelite , lcs complete set with all accessories , elect earthing complete set , hot water boiler of capacity 500ltrs , puf insulated 55mm thickwater tank 1000 ltrs with gi , water staging platform made of ms angle of size 40x40x6 mm , ppr pipe 20mm dia , ppr pipe 25mm , ppr tee 20mm , ppr tee 25mm , ppr elbow 90 degree 20 mm , ppr elbow 25mm , ppr elbow 90 degree 25mm , ppr male threaded socket 20 to 15 mm dia , ppr female threaded socket 20 to 15 mm dia , ppr female threaded elbow 20 to 15 mm dia , ppr male threaded elbow 20 to15 mm dia , ppr socket 20mm dia , ppr socket 25mm dia , ppr union 20mm , ppr union 25mm , ppr reducer 25x20mm , ppr reducer tee 25x20mm , bib tap brass chromium plated sutable for 15mm ppr water supply line , ppr balve valve light weight brass 20 mm , pvc clip for ppr pipe 25mm dia , pvc clip for ppr pipe 20mm dia , ppr reducer elbow 25x20mm , ppr male threaded tee 25x20mm , pillor cock brass chomium plated , taeflon tape , pvc float value heavy duty 25mm dia suitable for ppr pipe , 25mm pp to r tank connector , pvc pipe 4 inch dia 6 mtr long heavy duty type a having 5 kg pressure oblique sqcm , pvc socket 4 inch dia , pvc elbow 4 inch , pvc tee 4 inch , pvc floor trap 4 inch dia with grating 4 inch outlet , wash hand basin 500x400mm steel with waste pipe and coupling alongwith 02 nos ci bracket with screw pvc connection 450mm long , looking mirror size 450 x 600 x 5 point 5 mm thick with 4 mm ply backing and aluminium l section frame with nacessary hanging clips , stainless steel peg stay contains 4 hooks fancy type , soap dishes stainless steel size 10cmx12cm , towel rail cp 600mm long , plaster trowel with woodwen handle , plumb bob iron , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight 1 kg , double end spanner for 16 mm dia nuts and bolts , showel square nose 14 gauge high carbon steel product code svl 022 blade size 310 x 245mm shaft size 710mm fitted with strong steel crutched wooden handles , fish line , hammer ball pine 1kg , electric tile cutting machine with 5 nos inter changeable blades , measuring tape 3 mtr , gi sheet cutter scissors , transperant pipe 5 mm dia bore for water leveling , multipurpose non slip rubber reusable gloves for scrubbing cleaning brick work color og oblique black , full body safety harness light weight designes with breathable open core padding technology , gum boots for snow fall area , screw driver , portable drill machine with 06 nos 8mm dia bits , industrial safety helmet

Central Government/Public Sector

TRN :34375765 | 01 May, 2025

Tender Value : 0

Tumkur - Karnataka

Tender for gem bids for cnc turning center , touch probe for setup and tool measurement automatic , standard 3 jaw power operated chuck 160 mm or more with one set of hard and soft jaws , standard 4 jaw chuck 160 mm or more with one set of hard and soft jaws , work holding collets in steps of 1 mm , boring bar holder with 40 mm bore , boring bar holder with 32 mm bore , boring bar holder with 25 mm bore , boring bar holder with 20mm bore , revolving center , boring bar sleeves for dia 32 mm boring bar holder with id 6mm, 8mm, 10mm,12 mm, 16mm, 20mm , axial left hand toolholders , axial right hand tool- holders , radial right hand tool-holder , radial left hand tool- holder , er collet holder , er 32 collets 2 mm to 20 mm in steps of 1 mm , voltage stabilizer , additional hard jaws and soft jaws compatible for 3 jaw chuck supplied along with the machine. -1 set each

Central Government/Public Sector

TRN :34351748 | 29 Apr, 2025

Tender Value : 0

Darjeeling - West Bengal

Tender for gem bids for tmt bar fe 550 grade 8mm dia , tmt bar fe 550 grade 10mm dia , tmt bar fe 550 grade 12mm dia , tmt bar fe 550 grade 16mm dia , binding wire of 0.9mm dia , plywood 8 feet x 4feet x 18mm bwr grade , pre fabricated mild steel door size 3000mm x 2400mm as per technical specification , pre fabricated mild steel door of size 1500mm x 1830mm , app bitumen membrane sheet of grade 2504 thickness 3 point 0mm type film size 20mx1m , deck sheet curved shape 1 point 20mm tr 50 , quick setting compound , water proofing compound in 1 kg packing , fire resistance paint for internal surface , fire resistance primer for internal wall surfaces , synthetic enamel painting to steel surfaces as specified , red oxide primer , bitumen 80 oblique 20 grade , hdpe pipe rain water pipe 75mm dia , fire extinguisher a b and c type portable net 2 kg capactiy cylindrical , solar lantern , lighting conductors complete set , prefab steel ms plate of size 1000x1000x4mm to frame of size 1050x1050mm , hdpe hose pipe 25mm dia , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set , pcc solid block 400x200x200mm plus minus 10mm minimum strength 50kg oblique sqcm , 100mm thick interlocking tiles , cement ppc oblique opc 53 grade in poly bag of 50 kg each , sand coarse , stone aggregate coarse 20 mm , stone aggregate coarse 40 mm , 02 x skilled labour charge , hesco basket portable as per drawing attached , transparent pipe 5mm dia bore for water leveling , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle , fish line , plumb bob iron , galvanised iron pan mortar tasla 18 gauge 16 inch dia , rammer earth with handle , picks axes with chiesel and point ends kudali 14 cp , showel square nose 14 gauge blade size 310 x 245mm shaft size 710mm fitted , painting brush 100 mm , synthetic tarpaulin 550 gsm of size 30ft x 30ft green , multipurpose non slip rubber reusable gloves , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia , ms centering plates of size 90cm x 60cm of thickness 14 guage with two stiffeners , portable ms body needle vibrator machine with power 3 hp to 5 hp petrol engine

State Government

TRN :34340424 | 28 Apr, 2025

Tender Value : 0

Bathinda - Punjab

Tender for gem bids for single plate clutch , multi plate clutch unit , cut section of synchromesh gear box , model of mechanical brake , model of abs brake system , model of hydraulic brake system , ackerman steering gear mechanism , davison steering gear mechanism , model of power steering gear or recirculating type or worm and wheel or other type of steering gear , model of ac pump , model of su pump , lead acid battery , battery charger , wheel balancing machine , automobile electric system , brake master cylinder , cut section model of 4 cylinder 4 stroke petrol engine , ac induction motor with vfd for motorizing already existing models in lab , pelton turbine model , francis turbine model , cnc milling machine , cnc turning lathe , bench grinding machine , digital pyrometer , metallurgical microscope , polishing machine , heat treatement furnace muffle surface , spark test apparatus , metallurgical cut off machine , standard prepared readymade samples or specimen with photographs , apparatus for verification of law of polygon of forces , simple jib crane apparatus , simply supported beam apparatus , screw jack apparatus , inclined plane and friction slide apparatus , worm and worm wheel apparatus single start , winch crab single purchase apparatus , apparatus for determining centre of gravity of regular and irregular lamina , digital vernier callipar , digital micrometer , height gauge , go and no go thread plug gauge , go and nogo snap gauge , go and nogo ring gauge , cylinder rollers and spherical balls , slip gauges set , surface roughness tester , vernier bevel protractor , surface plate , v block , dial indicator with stand , tool maker microscope , auto collimator with stand , angle deckor with set of angle gauges , profile projector , cylindrical bore gauge , screw thread micrometer , sine bar 125mm , sine bar 250mm , feeler gauge , wire gauge , radius gauge , comparator stand , angle plate , mechanical comparator with stand , clinometer , gear tooth vernier , try square 6 inch , try square 12 inch , thread measuring gauge , electronic weighing machine , digital tachometer , tool kit , ampere meter , pressure gauge , compound gauge , ring spanner set , thermometer with case , swaging tool set , voltmeter , valve key , leak dedector to detect cfc and hfcs , thermostatic switch, lp and hp cut out, overload protector, filters, strainers and filter driers , model of refrigeration cycle , model of window air conditioner , refrigeration cycle testing rig , digital anemometer , gas charging kit , model of open type refrigerant compressor , thermocouple , infrared thermometer , models of safety valve, blow off cock, steam stop valve, feed check valve, economizer , model of air compressor , model of nestler boiler , model of solex carburettor , model of amal carburettor , model of ignition system of an automobile , model of water cooling system of an automobile , model of lubrication system of ic engine , oxygen regulator , green moulding sand , parting off sand , crucible

Related Keywords : power bore

List of latest power-bore Tenders in Indian Tenders. Click on any power-bore Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for power-bore Tenders.

Tender for repairs and maintenance of power bore wells and pump sets and procurement of motor starters and other accessories in sadasivpet municipality, under 15th fc grants, 2024-25.

Tender for providing bore well, mini power pump room with water supply arrangements at ward no.13, ettayapuram road in vilathikulam

Tender for providing of mini power pump existing bore well at ward no 02 ward no 03 ward no 04 and ward no 15

Tender for providing deep bore well, mini power pump room arrangemants and water supply arrangements at sathankulam colony3, viriportar street, and nazareth road near petrol bulk in sathankulam

Get power bore Tender Alert...

Related Keywords : power bore

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us