Filters

List of latest water-control-structure Tenders in Indian Tenders. Click on any water-control-structure Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for water-control-structure Tenders.

Name: Indian Council Of Agricultural Research
Start: 2025-10-29
End: 2025-11-14
Location: Bhubneshwar

All-Tenders (31)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35711436 | 14 Nov, 2025

Tender Value : 0

Bhubneshwar - Orissa

Tender for gem bids for submersiable pump with controller , solar plate , hdpe pipe , submersible cable , pvc touchen , gi structure for installation , water tank , material and civil work with material rcc for foundation , material transportation

Central Government And Public Sector

TRN :35718149 | 11 Nov, 2025

Tender Value : 0

Osmanabad - Maharashtra

Tender for gem bids for providing and supplying of measuring steel tape providingand supplying of combination plier insulated providing andsupplying of screw driver insulated providing andsupplying of electrician screw driver thin stem insulatedhandle providing and supplying of electrician screw driverthin stem insulated handle providing and supplying ofpunch centre providing and supplying of knife doublebladed electrician providing and supplying of neon tester providing and supplying of steel rule graduated both inmetric and english unit providing and supplying of hammercross peen with handle providing and supplying ofelectrical symbol and accessories charts providing andsupplying of pipe vice cast iron with hardened jaw opentype providing and supplying of table vice providing andsupplying of hacksaw frame with blade providing andsupplying of pliers long nose insulated providing andsupplying of pliers flat nose insulated providing andsupplying of pliers round nose insulated providing andsupplying of gauge wire imperial stainlees steel marked inswg mm providing and supplying of crimping tool providing and supplying of pliers side cutting providingand supplying of wire stripper adjustable length providingand supplying of hammer ball peen with handle providingand supplying of scriber knurled centreposition providingand supplying of tool kit boxbag portable providing andsupplying of allen key providing and supplying of scissorsblade providing and supplying of electrical loads set ofincandescent lamp providing and supplying of torquewrench providing and supplying of pipe cutter to cut pipes providing and supplying of multi meter analog providingand supplying of load bank variable providing andsupplying of wire cutter and stripper providing andsupplying of earth plate providing and supplying of earth bid number gem2025b6729081 dated 27-10-2025 bid document1 108 1 1 electrode, providing and supplying of out side micrometer, providing and supplying of tap set, providing and supplyingof trolley for transportation of batteries, providing andsupplying of die for threading, providing and supplying ofrooftop mounting structure, providing and supplying ofelectrical wiring and switch gear rack, providing andsupplying of protective relays and contactors rack, providing and supplying of mccb, providing and supplyingof elcb and rccb, providing and supplying of fuses, providing and supplying of cables set, providing andsupplying of solar cable red, providing and supplying ofsolar cable black, providing and supplying of three corewire, providing and supplying of battery cable, providingand supplying of resin cored solder, providing andsupplying of solder wax, providing and supplying of mc 4connector, providing and supplying of pins, providing andsupplying of lugs, providing and supplying of hacksawblades, providing and supplying of bolts nuts anchor boltswashers screw, providing and supplying of civil workutensils, providing and supplying of plumbing tools, providing and supplying of hydrometer, providing andsupplying of solar insulation meter, providing and supplyingof pyranometer, providing and supplying of pyrheliometer, providing and supplying of lux meter, providing andsupplying of magnetic flux meter, providing and supplyingof tong tester clamp meter, providing and supplying ofsoldering iron, providing and supplying of temperaturecontrolled soldering iron, providing and supplying ofthermometer digital, providing and supplying of sun shinerecorder, providing and supplying of weather monitoringstation, providing and supplying of solar cell based sunlightradiation meter, providing and supplying of magneticcompass, providing and supplying of cut models of photovoltaic cell assembly, providing and supplying of cut modelof lead acid battery, providing and supplying of lead acidbattery, providing and supplying of solar simulator, providing and supplying of iv curve tester, providing andsupplying of sun path finder, providing and supplying ofsolar energy trainer with grouping of solar cells, providingand supplying of solar tracker demonstrator kit, providingand supplying of solar pv elearning software, providing andsupplying of halogen lamp, providing and supplying ofmotorized bench grinder, providing and supplying ofbattery charger, providing and supplying of solarphotovoltaic module, providing and supplying of solarpanels, providing and supplying of solar charge controller, providing and supplying of solar charge controller manual, providing and supplying of array junction box, providingand supplying of solar lantern, providing and supplying ofsolar lantern assembly sets, providing and supplying ofhome light system, providing and supplying of solar cell kit, providing and supplying of clinometer, providing andsupplying of spirit level, providing and supplying ofanemometer, providing and supplying of dc table fan, providing and supplying of a c voltmeter m i, providing andsupplying of volt meter, providing and supplying ofammeter mc, providing and supplying of ammeter mccentre zero, providing and supplying of power factor meter, providing and supplying of rheostat, providing andsupplying of a c energy meter, providing and supplying ofac energy meter, providing and supplying of kilowattmeter analog, providing and supplying of digitalwattmeter, providing and supplying of phase sequenceindicator, providing and supplying of frequency meter, //bid details2 / 108 providing and supplying of dc led lamp, providing andsupplying of dc pump, providing and supplying of pwmcontroller, providing and supplying of mppt chargecontroller, providing and supplying of inverter with battery, providing and supplying of solar pcu, providing andsupplying of solar grid tied inverter demonstrator kit, providing and supplying of solar street light, providing andsupplying of solar wind and hybrid power plant, providingand supplying of solar traffic light, providing andsupplying of used water treatment solar plant, providingand supplying of solar dc pump, providing and supplying ofdemonstration kit for wind generation, providing andsupplying of rechargeable battery, providing and supplyingof led lights, providing and supplying of rubber gloves, providing and supplying of cotton gloves, providing andsupplying of gum boots, providing and supplying of safetygoggles, providing and supplying of safety helmet, providing and supplying of first aid kit, providing andsupplying of fire extinguisher co2, providing and supplyingof working bench, providing and supplying of wiring board, providing and supplying of instructor chair, providing andsupplying of trainee chair, providing and supplying oftrainee table for two trainee, providing and supplying ofmetal rack, providing and supplying of lockers withdrawers, providing and supplying of almirah, providing andsupplying of black boardwhite boardproviding and supplying of measuring steel tape, providingand supplying of combination plier insulated, providing andsupplying of screw driver insulated, providing and supplyingof screw driver insulated, providing and supplying ofelectrician screw driver thin stem insulated handle, providing and supplying of electrician screw driver thinstem insulated handle, providing and supplying of punchcentre, providing and supplying of knife double bladedelectrician, providing and supplying of neon tester, providing and supplying of steel rule graduated both inmetric and english unit, providing and supplying of hammercross peen with handle, providing and supplying of electricalsymbol and accessories charts, providing and supplying ofpipe vice cast iron with hardened jaw open type, providingand supplying of table vice, providing and supplying ofhacksaw frame with blade, providing and supplying of plierslong nose insulated, providing and supplying of pliers flatnose insulated, providing and supplying of pliers round noseinsulated, providing and supplying of gauge wire imperialstainlees steel marked in swg mm, providing and supplyingof crimping tool, providing and supplying of pliers sidecutting, providing and supplying of wire stripper adjustablelength, providing and supplying of hammer ball peen withhandle, providing and supplying of scriber knurledcentreposition, providing and supplying of tool kit boxbagportable, providing and supplying of allen key, providingand supplying of scissors blade, providing and supplying ofelectrical loads set of incandescent lamp, providing andsupplying of torque wrench, providing and supplying of pipecutter to cut pipes, providing and supplying of multi meteranalog, providing and supplying of load bank variable, providing and supplying of wire cutter and stripper, providing and supplying of earth plate, providing andsupplying of earth electrode, providing and supplying of outside micrometer, providing and supplying of tap set, providing and supplying of trolley for transportation ofbatteries, providing and supplying of die for threading, providing and supplying of rooftop mounting structure, providing and supplying of electrical wiring and switch gear //bid details3 / 108

Central Government / Public Sector

TRN :35631539 | 10 Dec, 2025

Tender Value : 3.24 Crore

Secunderabad - Telangana

Tender for providing architectural and technical consultancy for planning, designing, engineering and preparation of detailed project report including feasibility study for setting up of tier-iii disaster recovery data center along with allied structures including design of green rated building with building services, water tank, site development, stp/etp etc., and non-civil works such as driver face in auto number plate recording system, baggage scanners, door frame metal detectors, boom barrier, emergency light and signages and it includes design of electrical systems such as ups system, intelligent pdu, air-conditioning system, power supply systems including internal electrical installations and electrical sub-station. it covers the design of cctv surveillance system access control system, rodent repellent system, water leakage system, fire suppression system etc. it includes design of network systems such as infrastructure of internet gateway, fois net and utn, data center lan network security, adc, slb and waf, internet bandwidth triplication links and drwan, campus lan and network operations. it includes development of data center infrastructure management software and obtaining uptime tier-iii, tia rated-3 data center design certification. the rate includes complete design with design basis report and dpr.

State Government

TRN :35774469 | 27 Nov, 2025

Tender Value : 20.00 Lacs

Chhota Udaipur - Gujarat

Tender for gem bids for file flat rough double cut , file, half round, fine double cut , file, round, fine double cut , file flat, fine double cut , file square, fine double cut , file triangular fine double cut , scriber , centre punch , try square , divider spring joint , caliper spring joint in side , caliper, odd leg, spring joint , hammer ball pane , cold chisel flat and cross cut , engineers rule , tape measuring , pliers combination insulated , pliers long nose , pliers flat nose , line tester , tweezers , surface plate , oil can , surface gauge universal , bench vice , hack saw tubular adjustable , snip sheet metal straight nose , snip sheet metal curved nose , anvil , stakes different types , tin smith , wooden mallet nylon mallet , round punch , electrical drill portable drillwith chuck and key , screw driver, plastic handle , screw driver, plastic handle,flat tip , philips screw driver , screw driver, plastic handleflat tip , soldering iron exchangeable copper tip , knife folded stainless steel , tong tester clamp on multi meter , tenon saw , firmer chisel , rawal plug tool , fire extinguisher , fire buckets , d.e spanner , ring spanner , quick couples, process tube adopter , tong close mouth and pick , welding table for gas arc , flaring tool set, single type for tube. , swaging tool, punch type set of size for tube , bending spring external type, for copper tube , pipe cutter miniature for copper tube , pinch of tool, for copper tube , ratchet spanner , capillary plug gauge , piercing pliers and reversing valve with access fitting , spanner double ended , ring spanner off set , wrench adjustable , valvekeyhandletreatedas consumable , hollo punch hole for cutting gasket , scissor, gasket cutting stainless steel , l allen key , t allen key set , pipe cutter with built in reamer and space cutter, for copper tube , pipe tube bender lever type , pipe wrench , lapping plate , hammer ball peen , puller 3 legged with flexible arm , hand blower portable complete , spirit level precision metallic , tap set with matching drills , refrigerant cylinder , heating kit with infrared bulb , plumbing hammer weight , cylinder 134 a , torque wrench , piercing valve , feeler gauge , four way reversible valve , vernier height gauge , tape measuring graduation in mm , voltmeter ac dc portable precision grade digital panel board type , ammeter ac dc portable precision grade digital panel board type , megger , wattmeter multi-range up , multi meter digital type , k.w. meter , service oscillator , c.r.o single beam , c.r.o dual trace double beam , a.f.o oscillators , pressure gauge digital type , compound gauge , digital type , service man thermometer in metal case , gas leak detector for halogen gas , electronic leak detector , sling psychrometer mounted on aluminum back, , stop watch , vernier caliper , micrometer outside measurement , multi meter analogue type , tachometer digital, multi range , micron vacuum gauge , sensor thermometer digital , fin straightened fin comb , filler gauge , wire gauge metric and british , dial thermometer remote control armored capillary dial , anemometer , compressors testers for small hermetic compressors , digital thermometer , temperature humidity recorder , instrumentation screw driver set , digital weighing machine , split phase induction motor , bldc motor with controller , idu pulse generation type motor , capacitor start induction motor , ac 3 phase motor 400 50 hz , star delta starter , auto transformer starter , d.o.l starter , portable air lpg brazing kit , oxy acetylene welding set complete , single door direct cool refrigerator, carrying with hfc and hc , frost free refrigerator , three four door refrigerator inverter type , core drill machine , bench drilling machine , grinding machine , evacuating and refrigerant charging station, consist of , evacuating and charging station as above but fitted with weighing scale , two stage rotary vacuum pump,3or 4 cfm. , dry n2 cylinder , window a.c , split a.c , duct able split a.c 1.5 ton , recovery unit with cylinders , decibel meter , cassette air conditioner , de scaling pump set , fan coil unit , shell and tube, dx chillers small , circulating water pump small , refrigerant cylinder , gauge manifold with gauges , shell and tube type condenser , rotary hermetic compressor , bottle cooler visible , deep freezer , display cabinet , water cooler storage type , water dispenser bubble type hot and cold , ice candy plant , air-conditioning, direct system. , airconditioning indirect system water cooled , package a c , car a.c components full kit , car ac tutorial model , bus ac tutorial model , automatic ice cube m c , storage type water cooler hot and cold , visi cooler , vrf vrv unit with two indoor units 2.5tr each and 5tr capacity out door nit complete with air cooled condenser accessories and controls. , split a c inverter technology , walk in cooler puf insulated for cold room 6x4.5x8 cft , absorption system , class room table , work bench , almirah , lockers , glass board portable , instructor table , instructor chair , computer table , computer chair , white board , chart stand , desktop computer , lcd projector led lcd tv , laptop , ups , copier machine. , interactive board , stool , book self with glass panel , storage rack , storage shelf

Central Government / Public Sector

TRN :35781283 | 18 Nov, 2025

Tender Value : 0

Jalgaon - Maharashtra

Tender for gem bids for piercing needle v5/ct/054-f sheet no. 2 for verticalpress pwt-80/15 stn4.

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35763827 | 10 Nov, 2025

Tender Value : 2.94 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at gups narayanpura - demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). random rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :cement mortar 1:6 ( 1-cement : 6-sand).cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." stone kharanja : random rubble dry stone kharanja under floor. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr

State Government

TRN :35764535 | 05 Nov, 2025

Tender Value : 1.68 Lacs

Alappuzha - Kerala

Tender for annual plan-2025-26, project no 114/26, avoid water flooding in various wards inkadakkarapally gp-general civil work

Central Government And Public Sector

TRN :35764799 | 07 Nov, 2025

Tender Value : 0

Rangiya - Assam

Tender for remedial measures to check scouring around foundation of pier no-4 of bridge no- 175 at km-74/1-2 between section rwtb-mjbt under the jurisdiction of aden/rpan

Central Government/Public Sector

TRN :35765626 | 24 Nov, 2025

Tender Value : 0

Malda - West Bengal

Tender for e-tender for the work of replacement of girder of central span with strengthening of pier of bridge no. 38 up (12.2m plate girder) at new farakka - malda town section of malda division by ps slabs.

Related Keywords : water control structure

List of latest water-control-structure Tenders in Indian Tenders. Click on any water-control-structure Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for water-control-structure Tenders.

Tender for gem bids for submersiable pump with controller , solar plate , hdpe pipe , submersible cable , pvc touchen , gi structure for installation , water tank , material and civil work with material rcc for foundation , material transportation

Tender for gem bids for piercing needle v5/ct/054-f sheet no. 2 for verticalpress pwt-80/15 stn4.

Tender for annual plan-2025-26, project no 114/26, avoid water flooding in various wards inkadakkarapally gp-general civil work

Tender for remedial measures to check scouring around foundation of pier no-4 of bridge no- 175 at km-74/1-2 between section rwtb-mjbt under the jurisdiction of aden/rpan

Tender for e-tender for the work of replacement of girder of central span with strengthening of pier of bridge no. 38 up (12.2m plate girder) at new farakka - malda town section of malda division by ps slabs.

Get water control structure Tender Alert...

Related Keywords : water control structure

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us