Filters

List of latest box-drain Tenders in Indian Tenders. Click on any box-drain Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for box-drain Tenders.

Name: Highway Department
Start: 2025-11-04
End: 2025-11-18
Location: Pudukkottai

All-Tenders (202)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35771056 | 18 Nov, 2025

Tender Value : 6.04 Crore

Pudukkottai - Tamil Nadu

Tender for widening and strengthening, junction improvements, reconstruction of box culvert and construction of drain works in govt roads in respect of aranthangi and alangudi h c and m sub division try 72 try 72 aranthangi and alangudi h c and m sub division

State Government

TRN :35771761 | 22 Nov, 2025

Tender Value : 0

Gandhi Nagar - Gujarat

Tender for gem bids for laboratory, bags, wash bottle, carboy with stopcock, centrifuge tubewith cap conical bottom, centrifuge tube with cap conicalbottom self stand, funnel, measuring beaker, measuringbeaker with handle, micro centrifuge tube, micro tip boxuniversal, micro tips, micro tips gel cutting, micro tipslow retention, microscope slide mailer, microtube pestle, para film dispenser, rack float rack, rack for 4 wayuniversal tubes, rack for micro tube storage, rack formicro tubes, rack reversible, rack stand for pipettor, rack stand vertical for glass pipette, pipette box, spatula, stirring rod, test tube basket with cover, tray utility, uvprotecting eye covers, screw cap for gc vials, septa forscrew cap, polyspring inserts for 2 ml vials, cuvette rack, sample bottle with wide mouth, sample bottle with 69widemouth, carboys with stop cork, powder funnel, conicalflask with screw cap, pipette stand, petri dish, drainingbasket, test tube basket with cover, pipette tray with4compartments, staining box, scoop, long handle scoop, stirrer, draining rack, carrier tray, sample containerpress and fir type, storage vial, cryo rack, float rack, slide draining tray, three tier microtube rack, slide storagerack, mct twin rack with lid, slide mailer, desiccatorvaccum /bid number: gem/2025/b/6808091* /dated: 01-11-2025 & & / bid document1 / 67

Central Government And Public Sector

TRN :35772916 | 25 Nov, 2025

Tender Value : 0

Uttara Kannada - Karnataka

Tender for gem bids for ms., 12. bearing housing de part no 19 of dwg no. mpl-hh2m-65-010-7276-01 for maxflow make pump, model-65hh2m and pump serial no.06060032 and 06060033 moc-ci, is 210, fg 260., 13. coupling key part no 21 of dwg no.mpl-hh2m-65-010-7276-01 for maxflow make pump, model-65hh2m and pump serial no.06060032 and 06060033 moc-ms., 14. grease cup part no 22 of dwg no. mpl-hh2m-65-010-7276-01 for maxflow make pump, model-65hh2m andpump serial no.06060032 and 06060033 moc- ms., 15.coupling set, pump and motor for maxflow make pump, model-65hh2m and pump serial no.06060032 and06060033., 16. impeller, part no 3 of dwg no. mpl-hh2m-65-010-7276-01 for maxflow make pump, model-65hh2mand pump serial no.06060032 and 06060033 moc-bronzeis 318, 17. shaft sleeve part no 7 of dwg no. mpl-hh2m-65-010-7276-01 for maxflow make pump, model-65hh2mand pump serial no.06060032 and 06060033 moc-bronzeis 318, 18. shaft sleeve, part no 7 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150 hds1and pump serial no. 6060034 and 6060035. moc- bronze, is-318. 1 set - 2 no of sleeves, 19. body wearing ring, partno 11 of dwg no. mpl-hds1-150-002-7276-01 for maxflowmake pump, model-150 hds1 and pump serial no. 6060034and 6060035. moc-bronze, is-318., 20. seal cage, part no15 of dwg no. mpl-hds1-150-002-7276-01 for maxflowmake pump, model-150 hds1 and pump serial no. 6060034and 6060035. moc-bronze, is-318., 21. pump shaft, partno 21 of dwg no. mpl-hds1-150-002-7276-01 for maxflowmake pump, model-150 hds1 and pump serial no. 6060034and 6060035. moc-en 8., 22. impeller, part no 13 of dwgno. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and6060035. moc-bronze, is-318., 23. gland flange, part no 8of dwg no. mpl-hds1-150-002-7276-01 for maxflow makepump, model-150 hds1 and pump serial no. 6060034 and6060035. moc-ci, is 210, fg 260., 24. bearing housing, part no 1 of dwg no. mpl-hds1-150-002-7276-01 formaxflow make pump, model-150 hds1 and pump serial no.6060034 and 6060035. moc-ci, is 210, fg 260., 25.bearing collar, part no 24 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150 hds1 andpump serial no. 6060034 and 6060035. moc-ci, is 210, fg260., 26. stuffing box bush, part no 25 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150hds1 and pump serial no. 6060034 and 6060035. moc-bronze, is-318., 27. splash ring, part no 6 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150hds1 and pump serial no. 6060034 and 6060035. moc-rubber., 28. grease cup, part no 2 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150 hds1and pump serial no. 6060034 and 6060035. moc-ms., 29.bearing cover, part no 5 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150 hds1 andpump serial no. 6060034 and 6060035. moc-ci, is 210, fg260., 30. drain plug, part no 10 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150 hds1 andpump serial no. 6060034 and 6060035. moc-ms., 31.impeller key, part no 17 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150 hds1 andpump serial no. 6060034 and 6060035. moc-ms., 32.coupling key, part no 19 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150 hds1 andpump serial no. 6060034 and 6060035. moc-ms. //bid details2 / 32

State Government

TRN :35774728 | 21 Nov, 2025

Tender Value : 1.31 Lacs

North 24 Paragana - West Bengal

Tender for construction of cc road from kazidanga to house of azad mondal, at murali, booth no-17. construction of pucca drain from house of maola box to sukuranjan, at bazitpur, booth no-16.

corporations/Associations/Others

TRN :35776721 | 10 Nov, 2025

Tender Value : 1.56 Crore

Warangal - Telangana

Tender for construction of balance work of community hall in seetharamanjaneya temple, shambunipet in div. no. 41 c/o balance work of community hall in ursu maroof nagar in div. no. 41, c/o box drain from telangana colony apartment to culvert at ursu bypass road in div. no. 42, c/o balance work of community hall in lenin nagar in div. no. 42, c/o balance work of beeranna community hall in div. no. 42 stamp duty fund

corporations/Associations/Others

TRN :35778028 | 10 Nov, 2025

Tender Value : 1.52 Crore

Warangal - Telangana

Tender for development of grave yard in shanthi nagar in div no.33.construction of cc mini box drain in vishwanatha colony in div no.34.development of muslim grave yard at east fort for gouda and rajaka grave yard at fort warangal in div no.37.development of hindu grave yard in nagendra nagar in div no.41.development of christian grave yard in div no.41 recall

corporations/Associations/Others

TRN :35778422 | 10 Nov, 2025

Tender Value : 1.32 Crore

Warangal - Telangana

Tender for construction of balance work of sikhs community hall at kamela road, warangal in div. no.26 balance work of existing kamela community hall at laxmipuram, warangal in div. no.26 construction of box drain from shivanagar elsr to pallavi hospital in div. 34 construction of balance work of community hall at ramalayam temple first floor, warangal in div. no.34 construction of balance work of community hall near sri vaishnava sangam, shivanagar in division no.34 construction of balance work of ambedkar community hall in division no.35 reserved for sc contractors

corporations/Associations/Others

TRN :35779202 | 13 Nov, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for valve collet 3 groove , valve stem seal , t bolt clamp 90 mm , precoated drain plug , rubber bush top , temperature sensor 4k1080tae 122.1kw , manifold absolute pressure sensor ds s3 tf 4b , koel care genuine coolant premix 26 litres can , k sealent 80 ml , kirloskar care gold genuine oil 50 litre can , joint for cover plate , banjo bolt , o ring for inlet manifold sleeve dia 104 , o ring for inlet manifold sleeve dia 94 , joint bet. inlet manifold and cyl head , expansion bellow 3 mm , joint , t bolt v band clamps 108 dia , o ring for cac pipe sleeve 114 dia , o ring for cac pipe sleeve dia 84 , pre filter cartridge , special banjo bolt for oil spay nozzle , grommet 12 dia ferrule , grommet 22 dia ferrule , ferrule 12 dia , ferrule 22dia , grommet support washer 20.2 , grommet support washer 31.5d , connecting rod bolt , big end bearing top miba , big end bearing bottom miba , inlet valve seat insert semi finish , gasket cylinder head 1.15 thk , valve guide finish , inlet and exhaust valve pair , o ring 38 dia l.o. header , o ring 58 dia l.o. header , o ring 67 dia l.o. header , joint water pump suction , gasket lub. oil header , joint suction pipe assly , o ring 29dia element oil cooler , hose radiator to suction pipe , hose pipe to thermostat , joint cooler cover , lube oil filter full flow spin on , lube oil filter by pass spin on , adaptor for lube filter full flow side , adaptor for lube filter by pass side , thermostat element , joint thermostat housing , gasket thermostat cover , water pump assly , rubber bush bottom , oil supply pipe rh crank case turbocharger , oil supply pipe l h from crankacse to turboch , joint bet exh manifold and cyl head joint adaptor and turbo , joint flange for tc lube oil outlet pipe , v b and clamp 88mm nominal dia , joint exhaust bend and expansion bellow , joint centrifugal adaptor and filter , gasket oil sump and centrifuge adaptor , o ring for oil filling pipe , oil inlet pipe from crankcase to centrifuge fi , joint delivery tube flange , o ring dia 36 l.o. delivery tube , rubber bush , joint suction tube flange , joint breather plate and adapter , joint dv10 turbo , vent pipe for radiator 750 kva , piston cooling nozzle u s u i , cylinder liner assembly with abp ring , piston assly , v belt 2jbx58 pitch length 1550 , v belt spb ar1250 6 nos. set , luboil sump , fuel pipe fuel pump to main filter lh from g , fuel pipe fuel pump to main filter rh from ge , fuel pump leak off 1 rh from ge , fuel pump leak off 1 lh from ge , rail leak off pipe assembly , fuel pipe assly flexible , lub oil pump , oil cooler 17 plate pn nj 57000 for dv engine , common head leak off , radiator outlet hose for dv12e 750kva , joint bet bello exh manifold , turbo drain pipe rh from flywheel end , turbo drain pipe , o ring for rocker box cover , fuel pipe return , pressure and temperature sensor , bridge for rocker lever , final filter cartridge , joint for fuel pump , flex.hose for vent , hose clamp , air cleaner primary element , air cleaner safety element , hose bolt clamp 137mm od , hose for balance water pipe , hose t bolt clamp 112mm od , o ring drain plug , nut m8x1.25 gr8 , plain machined washer m10 , nut m10x1.5 gr8 , centrifugal filter service kit for dv , joint bet water pump hsg and header , bush bearing se dv0 , top overhauling charges per cylinder , machining of cylinder head per cylinder , connecting rod bushing per cylinder , injector testing charges cylinder , turbo service charges , fuel tank cleaning charges , radiator cleaning charges valve collet-3-groove, valve stem seal, t- bolt clamp ( 90 mm), precoated drain plug, rubber bush top, temperature sensor: 4k1080tae 122.1kw, manifold absolute pressure sensor ds s3 tf 4b, koel care genuine coolant premix 26 litres can, k sealent (80 ml), kirloskar care gold genuine oil 50 litre can, joint for cover plate, banjo bolt, o ring for inlet manifold sleeve dia 104, o ring for inlet manifold sleeve dia 94, joint bet. inlet manifold & cyl head, expansion bellow 3 mm, joint, t bolt v band clamps (108 dia)., o ring for cac pipe sleeve 114 dia, o ring for cac pipe sleeve dia 84, pre-filter cartridge, special banjo bolt (for oil spay nozzle), grommet: 12 dia ferrule, grommet: 22 dia ferrule, ferrule: 12 dia, ferrule: 22dia, grommet support washer-20.2, grommet support washer-31.5d, connecting rod bolt, big end bearing top miba, big end bearing bottom miba, inlet valve seat insert semi-finish, gasket: cylinder head 1.15 thk, valve guide finish, inlet & exhaust valve pair, o ring 38 dia: l.o. header, o ring 58 dia: l.o. header, o ring 67 dia: l.o. header, joint: water pump suction, gasket (lub. oil header), joint: suction pipe assly, o ring 29dia: element oil cooler, hose: radiator to suction pipe, hose: pipe to thermostat, joint: cooler cover, lube oil filter full flow spin on, lube oil filter by pass spin on, adaptor (for lube filter) (full flow side), adaptor (for lube filter) (by-pass

State Government

TRN :35763827 | 10 Nov, 2025

Tender Value : 2.94 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at gups narayanpura - demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). random rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :cement mortar 1:6 ( 1-cement : 6-sand).cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." stone kharanja : random rubble dry stone kharanja under floor. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Related Keywords : box drain

List of latest box-drain Tenders in Indian Tenders. Click on any box-drain Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for box-drain Tenders.

Tender for widening and strengthening, junction improvements, reconstruction of box culvert and construction of drain works in govt roads in respect of aranthangi and alangudi h c and m sub division try 72 try 72 aranthangi and alangudi h c and m sub division

Tender for construction of cc road from kazidanga to house of azad mondal, at murali, booth no-17. construction of pucca drain from house of maola box to sukuranjan, at bazitpur, booth no-16.

Get box drain Tender Alert...

Related Keywords : box drain

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us